Clean your windows 10 PC using windows defender antivirus

Clean your windows 10 PC using windows defender antivirus

Windows malware is as yet a major issue. That is the reason Microsoft ships an antivirus named Microsoft Defender with Windows 10. It examines for malware out of sight, however, you can likewise play out a full-framework filter with Defender.

In the first place, open the Start menu and type “Windows Security.” Click on the “Windows Security” application symbol

  1. In the sidebar, click “Infection and Threat Protection.”
  2. It’s conceivable to do a speedy output from here by tapping the “Snappy Scan” button. On the off chance that you haven’t filtered as of late, you should consider doing a more profound sweep. In the region beneath the “Current Threats” heading, click “Sweep Options.”
  3. In the “Output Options” menu, you will see a rundown of four distinct kinds of sweeps you can perform on your PC utilizing Microsoft Defender.
  4. Speedy Scan: Scans organizers in your framework where dangers are typically discovered, for example, the Downloads and Windows envelopes. This normally just takes a couple of moments to finish.
  5. Full Scan: This sweeps each record on your PC and every single running system too. The sweep may take longer than an hour to finish.
  6. Custom Scan: If you pick this choice, Windows Security will approach you for a particular record or envelope area that you’d prefer to examine.
  7. Microsoft Defender Offline Scan: This alternative restarts your machine and sweeps framework documents and projects while they are not running, which is valuable if a bit of malware is at present running and conceivably meddling with the output.
  8. On the off chance that you haven’t attempted Defender previously or if your PC is acting entertaining and you’re stressed over a conspicuous danger, it’s ideal, to begin with, a Full output. Select the radio catch close to “Full Scan” and snap the “Sweep Now” button.
  9. A full-framework sweep will start, and Windows Security will show an advancement marker bar.
  10. At the point when the sweep is finished, you’ll see the outcomes. In the case of everything was alright, you’ll see a message that says “No Current Threats.”
  11. In any case, if the sweep found some malware, you will see a message that says “Dangers Found” and a rundown of the tainted documents just underneath.
  12. To evacuate the dangers, click the “Start Actions” button.
  13. After clicking “Start Actions,” Microsoft Defender will expel the dangers naturally. If you’d prefer to see subtleties on what dangers were evacuated, look underneath the output outcomes, and snap “Insurance History.”
  14. Additionally, if the Defender found a danger during a Quick or Full output, it might be shrewd to pick “Microsoft Defender Offline Scan” on the Scan Options screen and run it promptly a short time later in the event of some unforeseen issue. Ideally, everything will come out ordinary.

How To Fix Can’t Find the Name of the Intel ICD OpenGL Driver Error

Some Windows users have received Can’t find the name of the Intel ICD Open GL driver when opening a game, Google Chrome, or any other application using Open GL ES. In most cases, the problem arises after the user has upgraded to Windows 10 from an older version. In some cases, the upgrade process stops installing an incompatible HD Intel driver that produces the error.

Here is a quick list of applications and games known to conflict with these changes, give rise to Can’t find the name of Intel ICD Open GL driver error:

1.Google Chrome
2.Nvidia Control Panel
3.Nvidia GeForce Experience
4.Advanced Arduino Telemetry and Data
7.Gephi for homework
8.GeoGebra Classic
9.Ultima Online
10.Just Vu Observer
11.Wakfu (Steam version)

If you are currently working on Unable to find the name of the Intel ICD Open GL driver error, the methods below may help. We’ve been able to identify some potential fixes that solve the problem for users in a similar situation to you. Please follow the corrections below to see who can solve the problem.

Method 1: Download the latest version of Intel Graphics Driver

Fortunately, Intel jumps on this problem quite early so we already have a profitable solution that has been confirmed by many problems. The latest new driver base line (15.46) includes hotfixes that specifically address the issue. Before doing anything else, install this driver and see if it can solve the problem.

Here’s a quick guide on how to do this:

  1. Visit this link (here) and download the installer.

2.Open the executability and follow the on-screen instructions to install the latest Intel driver version.

3. Restart the computer and see if Cannot find the name of the Intel ICD Open GL driver error has been removed by opening the program that previously showed problems.

If this method did not solve the problem, go down to Method 2.

Method 2: Change the software version to your PC architecture

Other users have reported that the culprit has not been identified as an incompatibility for the driver, but an incompatibility with the application architecture version.

To become clearer, the name of the Intel ICD Open GL driver error cannot be found can also occur if you try to open a program designed to run on a 32-bit system from a 64-bit computer. The same is true even though the probability is much less. With this in mind, let’s examine if your operating system architecture version matches the application bit version. Here’s a quick guide through the whole thing:

1.Press the Windows + R key to open a Run command. Type cmd and press Enter to open a command prompt.

2. In the command prompt, type the following command and press Enter:

3. You will be able to see the now used architecture directly under OSArchitecture.

4. Once you have verified that the software version is correct, restart your computer and see if the program manages to run at the next restart.

If you are still struggling with the problem, proceed to the last method.

Method 3: Scroll back to an older Intel Graphic driver version

If the first two methods were not helpful, it is quite possible that the general hotfix that Intel released does not apply to your situation and your PC manufacturer has not yet released a specific driver update for your model.

In this case, the only profitable solution is to refer to an older version that worked correctly with the computer’s specifications. Here’s a quick guide to doing this:

1.Visit this link (here) and download the Intel® Graphics Driver installer (version 15.40) according to your Windows version and OS architecture.

Although you can experiment with different versions from Intel’s Download Center, version 15.40 is known to be one of the stablest releases. If you find that this driver produces the same Can’t find the name of Intel ICD Open GL driver error, you can experiment with different older versions.

2.Open the installer and follow the on-screen instructions to install the older Intel® Graphics Driver.

3.Once the driver is installed, restart the computer and see if the problem is resolved and you can open the program without being able to find the name of the Intel ICD Open GL driver error.

How To Fix Element Not Found Error On Windows 10

Some users have reported the Explorer.exe element not found when trying to open Microsoft Edge or Microsoft Store apps. The problem usually occurs after the user upgraded from an older Windows version to Windows 10.

If you are currently struggling with this problem, we have been able to identify any potential corrections that have allowed users in a similar situation to solve the problem. Please follow each method in order and skip any potential correction that is not applicable to your situation. Let’s start.

Method 1: Uninstall Lenovo’s OneKey Theater

Most users who encounter the problem are on Lenovo desktop or laptop computers. If you are in the same situation, the problem is probably caused by a built-in One-Key Theater Lenovo feature.

Note This method applies only if you encounter the problem on the Lenovo hardware. If you have another PC / portable manufacturer, you cannot follow the steps described below.

OneKey Theater is a tool that the OneKey watches should be pressed on and adjusts the display and sound settings to presets. As it turns out, the software conflicts with a Windows component because one of its processes listens to the keystroke.

If you have it on your system, you can easily uninstall OneKey Theater software. To do this, open a queue window (Windows key + R), type appwiz.cpl and press Enter. Once you have accessed the Programs and Features screen, right-click the OneKey Theater and select Uninstall.

If this has not solved your problem or if it is not applicable, go down to the method below.

Method 2: Restart the File Explorer service through the Task Manager

Another popular fix that has made it possible for users to fix the Explorer.exe element not found error is to restart the File Explorer service in the Task Manager. To make the whole process clearer, here’s a guide through the whole thing:

  1. Open the Task Manager (Ctrl + Alt+ Del) and open the Processes tab. Then right-click Windows Explorer and click End Task

Windows enters a kind of black screen for a few seconds. Don't freak when this is completely normal.

2. Open Task Manager (Ctrl + Shift + Esc) again and go to File> Run New Task. In the Create New Task window, type cmd (without quotes) and select the box next to Create this task with administrative permissions.

3. In the new repeated command prompt window, type explorer and press Enter.

4. In a few seconds, you should see the taskbar reappear. At this point, try to open the Edge or Store application that triggered the Explorer.exe element that was not found.

If the problem is not yet resolved, go down to the last method.

Method 3: Uninstall the latest Windows updates

Some users who managed the Explorer.exe element did not find errors managed to solve the problem by uninstalling the latest Windows updates. As it turned out, the problem solved for some users indefinitely (even after WU automatically applied the updates automatically.

Here’s a quick guide to uninstalling the latest Windows updates:

1. Press Windows Key + R to open a Run command. Type appwiz.cpl and press Enter to open Applications and Features.

2.Then click View Installed Updates> Latest Updates. Then uninstall each new update systematically. Don’t worry about leaving your system vulnerable because the WU (Windows Update) component will automatically apply them again.

3. Restart the system and see if the Explorer.exe element not found error has been resolved. If you are prompted to install pending Windows updates, you accept them all.

If you are still struggling with the same problem, proceed to the last method.

Method 4: Perform a Windows recovery

If all of the above methods have failed, this is your last resort. Some users have only been able to solve the problem after performing a Windows restore. Unlike installing your operating system, it does not require you to install the installation media. Even more, you will be able to keep your personal files such as pictures, video clips and multiple user settings. If you decide to go through it, see our Windows recovery article (restore Windows 10).

How To Fix: Windows Update Error 0x80070057

Error 0x80070057 indicates that Windows updates have failed and there are many reasons for the error that pop-ups that may be corrupt Windows Update components, previous updates that failed and caused corruption with the system files needed to package and unpack update packages and apply them . The 0x80070057 is hexadecimal error number and is common in Windows Vista, 7, 8 and 10.

The error is usually followed by a long message that is There were some problems installing updates, but we try again later If you continue to see this and want to search the web or contact support for information this can help – (0x80070057). This error can also come up with a slightly different message that something went wrong

In this manual, we have listed several methods that have worked for a large number of users in Windows Vista, 7, 8, and 10. Please review all methods, as they are continuously updated. From experience I can tell you that you have to come back to this page because there will be some restart when you perform and go through the methods, therefore it is best to either send the link to this page to your email or bookmark this one page so you can come back to it.

Method 1: Restore Windows Update Repository

Download and run Reimage Plus to scan and recover corrupt and missing repositories from here, then try updating Windows. If it does not work, move to method 2.

Method 2: Run SFC Scan
see step here.

Method 3: Run SFCFix

see step here.

Method 3: Run SFCFix

Click here and run the file SFCFix.exe. Accept the instructions in the command prompt by pressing any button until the end.

Method 4: Run SURT

If you are running Windows 7/8/10, download SURT here and run it. After installing, try running the Windows update again. If it still does not work, continue with the registry below.

Method 5: Registry Edit

-Hold the Windows key and press R


-Type note pad and click OK
-Type note pad and click OK In Notepad copy and paste the following lines: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE SOFTWARE Microsoft WindowsUpdate UX] IsConvergedUpdateStackEnabled = dword: 00000000 [HKEY_LOCAL_MACHINE SOFTWARE Microsoft WindowsUpdate UX Settings] UxOption = dword: 00000000
-Click File -> Save As
-Enter the file type to All Files and save this file as wufix.reg on the desktop.
-The file must be exactly wufix.reg because the * .reg extension is the trigger for running this file through the registry. Now run the file and approve instructions.

After the program has run, check if it solves the problem. if not download the Windows Update Reset script and run it as an administrator. [Download here] (Right-click and select Save As). Save it to the desktop, right-click it and select Run as administrator.

Method 6: 04/08/2016 Windows 10 anniversary update failed due to error 0x80070057

If Windows 10 is unable to verify the downloads, the error on Windows 10 will also appear. Many users who have been updated from Windows 7 to Windows 10 and several updates have already been applied before the anniversary update, so it makes sense to believe that there may be serious errors in the update business, which prevents the annual anniversary update from being installed. The solution to fix the problem is to disable the Internet, (LAN or WAN) while the installer verifies the Anniversary Update Files.

-Hold the Windows key and press R. Type ncpa.cpl and click OK.

-Right-click either your wireless LAN adapter or Ethernet LAN adapter and select Disable. Once the update has completed verification, you can enable it by right-clicking on the disabled adapter.

In addition, many users began to have frequent chills and crashes on their Windows 10 after installing the anniversary. If so, check out the following guide @ Anniversary Update Crashes

Method 7: Remove CloudFogger

Some users reported received error 0x80070057 during backup, system recovery, and upgrades. According to birth, the cause of the problem is CloudFlogger. The problem arises from third-party tools such as CloudFlogger that installs filter drivers that interfere with system calls.

-Press the Windows key + R, type appwiz.cpl and click OK. On Windows 8.1 or later, you can hold down the Windows + X key and choose Applications / Apps and Features.
-Search the CloudFogger list and then double-click it. Follow the instructions in the uninstall and complete the uninstall.

– Restart your computer and check if the problem is gone.

Error 0x80070057 is also related to Credentials Manager on Windows 10. If you get the error with the authorization manager, check out the parameter is the wrong guide for how to fix it.

How To Fix Links Not Opening In Windows Live Mail

If you can’t open links in Windows Live Mail, it probably depends on program associations being disintegrated. You can change the default program associations again by following the steps below.

1. Click the Start button and type Standard Program in the search.

2. On the list of results, select Default application. This should be at the top of Programs or simply press the enter key after you have written the default program.

3. From the screen that opens, select Set your default applications from under Select programs that Windows uses by default

4. Then select your browser from the list, Internet Explorer and select this program by default and then click OK

5. In this step we need to return to the standard programs, see steps 1 and 2

6. Select the fourth option that is Click Enter program access and computer settings at the bottom and (Click Continue if you get a user account control question)> Select the Custom> option> Click the double arrow to the right of Custom> Choose a default browser, choose your default browser (probably Internet Explorer)> Make sure a check is in the box next to Enable access to this program. Scroll to Select a default e-mail program> Select Use my current e-mail program> Check again that a check is in the box next to Enable access to this program and then scroll to the bottom and click OK

Some users have reported success using FixIt – it’s worth trying. Download it from ->